View DICOM
English
Viewer

How to rotate, flip and straighten an X-ray image

Images do not always arrive the right way up. The cassette was turned, the patient lay the other way, or the scan is slightly tilted. Fixing the orientation takes a few clicks.

Quarter turns

⟳ Rotate 90° turns the image by 90° clockwise. Click twice for an upside-down image, three times for 270°. The button next to it turns the other way. On the keyboard: R and Shift+R.

Mirroring

Be careful with mirroring: it changes which side of the body appears on which side of the image. If the image contains a side marker (L or R), check that it still reads correctly – a mirrored letter is the sign of a mirrored image.

Rotation by an exact angle

For a tilted image, click the button showing the angle (∡). A panel opens where you set the rotation in degrees with a slider or by typing a number. Reset to 0° returns to zero.

Straighten by two points

The quickest way to level an image is to show the viewer a line that should be horizontal:

  1. Click Straighten by two points.
  2. Click one end of the line – for example one side of the pelvis.
  3. Click the other end.

The viewer calculates the angle and rotates the image so that the two points are level.

Do it before measuring

Changing the orientation removes measurements, notes and the crop on that image, because their positions would no longer fit. The viewer warns you in the status bar. So: orientation first, then measuring and notes.

Each file keeps its own orientation

When several files are open, the rotation and mirroring are remembered separately for each. You can switch between images without setting them again.

The original is not changed

Rotating affects only the display. The DICOM file on your disc stays as it was. To keep the corrected version, export it with ⬇ Export image or print it – the output is saved as you see it. Try it in the viewer.

Open the viewer – free Guide

More articles